Rebreather Safety Mouthpiece
RBSM – Rebreather Safety Mouthpiece The Rebreather Safety Mouthpiece is included as standard with all new Inspiration units. The key advantages of the new RBSM are improved comfort and greater rebreather safety. The head-strap holds the mouthpiece firmly in position allowing for a very relaxed grip on the bite and significantly reducing […]
ELASTIC HANDSET STRAP
RBV60 – Elastic Handset Strap [sold individually]
OFF-BOARD WEBBING CAMBAND (100-130MM CYLINDERS)
RB10/13 – Off-board Camband (100-130mm cylinders) An extremely secure method of mounting 100-130mm cylinders (1-1.5 litre or 2-3 litre). A stainless steel 3 bar buckle (included) is threaded onto the existing cylinder band and positioned so that it is located on the outside of the rebreather case. The RB10/13 off-board cam band is then threaded […]
50MM STAINLESS STEEL 3-BAR SLIDER
JJ4 – 50mm Stainless Steel 3-Bar Slider Sold individually Multiple uses with 50mm webbing: lock off webbing ends provide a slip-stop for weights on a weight-belt attach extra D rings to any area of 50mm webbing provide a slip-stop for the BK30 webbing loop & stainless D ring Used as standard on the AP MK3 […]
AP35S ELBOW & AP35T ADAPTOR 3/8″ UNF MALE TO 9/16″ UNF MALE
GC5 – Male Gas Connector The GC5 Male Gas Connector is a large bore, full flow adaptor for attaching to the 9/16″ UNF 2nd stage inlet. This allows the Auto Air type hose to be easily connected to AP Open Circuit Bailout Mouthpiece (OCB), Auto Diluent Valve (ADV) or any 2nd stage without impeding their […]
GCS MALE CONNECTOR (ONLY)
GC2A – Male End of the GCS Will connect to the female end of any EV50 (Auto Air) hose Hose Shortening Instruction Video
FEMALE SNAP CONNECTOR FOR GCS
GC1A – Female Snap Connector only The removable female quick release end of the Gas Connector System has a 9/16″ UNF thread connection to the hose which is a standard 2nd stage thread and therefore it can be connected to any make of regulator hose, except Poseidon. You can fit the GC3 FLOWSTOP in-line between […]
OFF-BOARD CYLINDER BRACKET & BAND SET (130MM)
EV92A – Off-Board Cylinder Bracket & Band Set (130mm) For off-board attachment of the 1.5L aluminium (argon) cylinder (AP6J). Complete with EV92/1 Case Plate, EV92/2 Cylinder Bracket and EV92/4 (130mm) Cylinder Bands. The nuts & bolts to attach the Case Plate are included. Fits all post-2006 AP rebreather cases (i.e. any AP case fitted with […]
OFF-BOARD CYLINDER BANDS (130MM)
EV92/4 – Off-board Bracket Cylinder Bands (110mm-130mm) only For use with EV92/1 Case Plate and EV92/2 Cylinder Bracket. Fits all post-2006 AP rebreather cases (i.e. any AP case fitted with rubber latches). PLEASE NOTE: The EV92/4 Cylinder Bands fit the 1.5litre AP6J aluminium cylinder but NOT the smaller diameter 2/3 litre cylinders To fit 2 […]
OFF-BOARD CYLINDER BANDS (100MM)
EV92/3 – Off-board Bracket Cylinder Bands (100mm) only For use with EV92/1 Case Plate and EV92/2 Cylinder Bracket. Fits all post-2006 AP rebreather cases (i.e. any AP case fitted with rubber latches). PLEASE NOTE: The EV92/3 Cylinder Bands fit 2 and 3 litre steel cylinders only To fit the 1.5litre AP6J aluminium cylinder you need […]
